2007 Publications

• 2009
• 2008
• 2006
• 2005
• 2004

Books:

Busnaina A., editor, “Handbook of Nanomanufacturing”, Taylor and Francis Group, CRC, 2006, ISBN 0-8493-3326-1.

Chapters in Books:

Adams G. and McGruer N., Chapter 10, “Nanocontacts and Switch Reliability”, “Handbook of Nanomanufacturing”, Taylor and Francis Group, CRC, 2006, ISBN 0-8493-3326-1.

Barry C., Chen J., Mead J., and Schmidt D, “Multiscale Processing of Polymers and Nanocomposites” in Materials Processing Handbook. Eds. Joanna R. Groza, James F. Shackelford, Enrique J. Lavernia, and Michael T. Powers. Pgs. 759-790. Taylor and Francis Group, Boca Raton, FL. 2007.

Barry C., Chen J., and Mead J., Chapter 13, “Nanomanufacturing Prrocesses Using Polymeric Materials”, “Handbook of Nanomanufacturing”, Taylor and Francis Group, CRC, 2006, ISBN 0-8493-3326-1.

Bosso C., Isaacs J., Kay W., and Sandler R., Chapter 16,”Leaving the Laboratory: Regulatory and Societal Issues Confronting Nanotechnology Commercialization”, “Handbook of Nanomanufacturing”, Taylor and Francis Group, CRC, 2006, ISBN 0-8493-3326-1.

Bosso C. and Rodrigues R, “Organizing around Emerging Issues: Interest Groups and the Making of Nanotechnology Policy,” Interest Group Politics, 7th ed., A. Cigler and B. Loomis (Eds.), CQ Press, Washington, D.C., Pgs. 366-388, (2007).

Busnaina, A., “Introduction to Nanomanufacturing,” Handbook of Nanoscience, Engineering, and Technology, 2nd Ed., W. A Goddard III, D. W Brenner, S. E. Lyshevski, G. J. Iafrate (Eds.), Taylor and Francis Group, Boca Raton, FL. (2007).

Busnaina A., Park J., and Bakhtari K., “Particle Deposition and Adhesion,“ Handbook of Silicon Wafer Cleaning Technology, 2nd Ed., K. Reinhardt and W. Kern (Eds.), William Andrew Publishing, Norwich, NY, 2006.

Busnaina A., and Bakhtari K., Chapter 11, “Nanoscale defects and Surface Preparation in Nanomanufacturing”, “Handbook of Nanomanufacturing”, Taylor and Francis Group, CRC, 2006, ISBN 0-8493-3326-1.

Jung Y.J., Chapter 4, “Controlled Synthesis of Carbon Nanontubes Using Chemical Vapor Deposition Methods”, “Handbook of Nanomanufacturing”, Taylor and Francis Group, CRC, 2006, ISBN 0-8493-3326-1.

Müftü S., Müftü A., “Biomechanics of Tooth and Jaw” Encyclopedia of Medical Devices and Instrumentation. Editor: J.G. Webster, John Wiley & Sons, NY, pp. 411-428, 2006..

Schmidt D., Mead J., Barry C., and Chen J., “Nanomanufacturing with Polymers,” in Handbook of Plastics Technologies, C. A. Harper, ed., McGraw-Hill, New York, NY (2006).

Papers in Peer Reviewed Technical Journals:

Athans, A.J., Briggs, J.B. and Miller, G.P., “Hydrogen Protected Acenes," J. Mater. Chem., in press.

Bakhtari, K., Guldiken, O., Makaram, P., Busnaina, A. and Park, J., “Experimental and Numerical investigation of Nanoparticle Removal Using Acoustic Streaming and the Effect of Time,” J. of Electrochemical Soc., May 2006.

Barmak, K., Cabral Jr., C., Rodbell, K.P. and Harper, J.M.E., “On the Use of Alloying Elements for Cu Interconnect Applications”, J. Vac. Sci. Technol. B24, 2485, 2006.

Borgaonkar, P., Sharma, S., Chen, M., Bhowmick, S., and Schmidt, D. F. “A Flexible, Biomimetic Approach to the Preparation of Polymer Scaffolds for Tissue Engineering”, Macromol. Biosci., 7, 201, 2007.

Briggs, J.B. and Miller, G.P., “[60]Fullerene-Acene Chemistry: A Review,” invited manuscript, Comptes Rendus Chimie, 2006, 9, 916.

Briggs, J.B. and Miller, G.P., "Recent Advances in Fullerene-Acene Chemistry," Recent Res. Devel. Organic Chem., 2006, 10, 1-22.

Busnaina, A., Bakhtari, K., Guldiken, G. and Park, J, “Experimental and Analytical Study of Submicron Particle Removal from Deep Trenches,” J. of Eletrochem. Soc., 153 (9) C603-C607, 2006.

Chandekar, A., Alabran,M., Sengupta, S.K., Lee J.S., Mead, J.L., Barry C.M.F, Whitten, J.E., Somu, S., Busnaina, A. "Fabrication of Stamps for Microcontact Printing by Injection Molding", Microelectronic Eng., submitted.

Chandekar,A., Sengupta S.K., Whitten J.E., "Template-Directed Patterning of Polymers and Biomaterials", , Micros. Res. Tech., accepted for publication.

Chandekar, A., Sengupta, S.K., Barry ,C.M., Mead J.L, Whitten, J.E. "Guided Assembly of Block Copolymers on Alkanethiol-Modified Gold Surfaces", , PMSE Preprints, 95, 56-57 (2006).

Chandekar,A., SenguptaS.K., Barry, C.M.,Mead, J.L., Whitten,J.E., Langmuir "Template-Directed Adsorption of Block Copolymers on Alkanethiol-Patterned Gold Surfaces", 22, 8071-8077 (2006)

Chandekar,A., Alabran, M., Sengupta, S., Lee, J.S., Mead, J.L., Barry, C.M., Whitten, J.E., Somu, S. and Busnaina A., Rapid production of injection moulded stamps for high-volume microcontact printing, Microelectronics Engineering, submitted for publication (2007)

Dellas, N.S. and Harper J.M.E., “Effect of Deposition Angle on Fiber Axis Tilt in Sputtered Aluminum Nitride and Pure Metal Thin Films,” Thin Solid Films 515, 1646, 2006.

Deniz, D., Harper, J.M.E., Hoehn, J.W. and Chen, F., “Tilted Fiber Texture in Aluminum Nitride Thin Films,” J. Vac. Sci. Technol, In Press.

Diaconuscu, B., Nenchev, G., Jones, J., and Pohl, K., “Self-organized Nanotemplating on Misfit Dislocation Networks Investigated by Scanning Tunneling Microscopy,”Microscopy Research and Technique , In Press.

Ekengren J., Sjoholm J., Oestling D., Rosen A., and Tomanek D., “A comparison of the electronic structure and optical plasmons in Csx, Csx shells and C60Csx clusters”, (submitted for publication).

Gaith M. and Müftü S., “Lateral vibration of two axially translating beams interconnected by Winkler foundation,” Journal of Vibration and Acoustics, Trans. ASME, accepted for publication September 2006.

Hong Y., Han J., Kim T., Park J., and Busnaina A., “The Effect of Frictional and Adhesion Forces Attributed to Slurry Particles on the Surface Quality of polished Copper,” J of Electrochem. Soc., 154 (1), pp. H36-H40, (2007).

Joudrey K., Adams G.G., and McGruer N.E., “Design, Modeling, Fabrication and Testing of a High Aspect Ratio Electrostatic Torsional MEMS Micromirror,” Journal of Micromechanics and Microengineering, Vol. 16, No. 10, 2006, pp. 2147-2156.

Jung Y.J., Kar S., Talapatra S., Soldano C., Vishwanathan G., Li X., Yao Z., Ou F., Vajtai R., Ajayan P.M., Nalamas O., “Aligned Carbon Nanotube-Polymer Hybrid Architectures for Diverse Flexible Electronic Applications” Nano Letters, 6, 413 (2006).

Kay, W.D., and Sandler, R., “The Role of the Social Sciences and Humanities in the National Nanotechnology Initiative”, submitted to New Scientist.

Kay, W.D., and Rodriguez, R., “Patents: A Political Primer.” Issues in Science and Technology 2007 (forthcoming).

Lastella S., Mallick G., Woo R., Karna S.P., Jung Y.J., Ajayan P.M., Ryu C., Rider D., and Manners I. “Scaled-up Fabrication of High-Throughput Singlewalled Carbon Nanotube Field Effect Transistors ” Journal of Applied Physics, 99, 024302 (2006).

Lavoie, C., Detavernier, C., Cabral Jr., C., d’Heurle, F.M., Kellock, A.J., Jordan-Sweet, J., Harper, J.M.E, “Effects of Additive Elements on the Phase Formation and Morphological Stability of Nickel Monosilicide Films”, J. Appl. Phys., In Press.

Liu M., Lagdani J., Imrane H., Pettiford C. , Lou J., Yoon S., Harris V.G., Vittoria C., and Sun N.X., "Self-assembled Magnetic Nanowire Arrays", Appl. Phys. Lett. 6 March 2007.

Marx, K.A., Zhou T., Montrone, A.,McIntosh D., and Braunhut S.J., “A Comparative Study of the Cytoskeleton Binding Drugs Nocodazole and Taxol with a Mammalian Cell Quartz Crystal Microbalance Biosensor: Different Dynamics Responses and Energy Dissipation Effects,”, Analytical Biochemistry, 361, 77-92 (2007).

McKernan, J. L., Ellenbecker, M.J., Holcroft, C., “Evaluation of a Proposed Velocity Equation for Exothermic Process Control,” in press, Annals Occ. Hyg., 2007.

McKernan, J. L., and Ellenbecker, M. J., “Ventilation Equations for Improved Exothermic Process Control,” in press, Annals Occ. Hyg., 2007. Miller, G.P., “[60]Fullerene-Amine Chemistry: A Review,” invited manuscript, Comptes Rendus Chimie, 2006, 9, 952.

Miller, G.P., Okana, S. and Tománek, D. “Toward uniform nanotubular compounds: Synthetic approach and ab initio calculations,” J. Chem. Phys. 2006, 124, 121102. This paper was selected for the April 17, 2006 issue of the Virtual Journal of Nanoscale Science & Technology (http://www.vjnano.org/) highlighting focused areas of frontier research.

Miyamoto Y., Rubio A., and Tomanek D., “Real-time ab initio simulations of excited carrier dynamics in carbon nanotubes”, Phys. Rev. Lett. 97, 126104 (2006); Virtual Journal of Nanoscale Science & Technology: (http://www.vjnano.org); Virtual Journal of Ultrafast Science (http://www.vjultrafast.org)

Müftü S., “Mechanics of a thin, tensioned-shell, wrapped helically around a turn-bar,” Journal of Fluids and Structures, accepted for publication, September 2006.

Nemec N., Tomanek D., and Cuniberti G., “Contact Dependence of Carrier Injection in Carbon Nanotubes: An Ab Initio Study”, Phys. Rev. Lett. 96, 076802 (2006); Virtual Journal of Nanoscale Science & Technology: (http://www.vjnano.org)

Nasibulin A., Pikhitsa P., Jiang H., Brown D., Krasheninnikov A., Anisimov A., Queipo P., Moisala A., Gonzalez D., Lientschnig G., Hassanien A., Shandakov S., Lolli G., Resasco D., Choi M., Tomanek D., and Kauppinen E., “A novel hybrid carbon material”, Nature Nanotechnology 2, 156 (2007).

Nieva P.M., McGruer N.E., and Adams G.G., “Design and Characterization of a Micromachined Fabry-Perot Vibration Sensor for High-Temperature Applications,” Journal of Micromechanics and Microengineering, Vol. 16, 2006, pp. 2618-2631.

Okutucu, Tuba, Yener, Yaman, and Busnaina, Ahmed A., “Transient Radiative Transfer in Participating Media with Pulse-laser Irradiation—an Approximate Galerkin Solution,” J. of Quantitative Spectroscopy & Radiative Transfer, 103, 1, January, 2007, pp. 118-130.

Rainbolt, J.E. and Miller, G.P., "4,7-Diphenylisobenzofuran, A Useful Intermediate for the Construction of Phenyl Substituted Acenes," Journal of Organic Chemistry, in press.

Rauwerdink, K., Liu, J.F., Kintigh, J. and Miller, G.P., "Thermal, Sonochemical and Mechanical Behaviors of Single Crystal [60]Fullerene Nanotubes," Microscopy Research & Technique, in press.

Pamp A. and Adams G.G., “Deformation of Bowed Silicon Wafers Due To Applied Pressure and Adhesion,” Proceedings of IJTC2006 STLE /ASME International Joint Tribology Conference, October 22-25, 2006, San Antonio, TX, USA, CD-ROM, IJTC2006-12279.

Park, J., Lee, S., Ryu, J., Hong, Y., Kim, T., and Busnaina, A., “Interfacial and Electrokinetic Characterization of IPA Solutions Related to Semiconductor Wafer Drying and Cleaning,” J. of Electrochem. Soc., 153 (9) G811-G814 (2006).

Ryan P.J., Adams G.G., McGruer N.E., and Müftü S., “Contact Scanning Mode AFM for Nanomechanical Testing of Free Standing Structures,” Journal of Micromechanics and Microengineering, Vol. 16, No. 5, 2006, pp. 1040-1046.

Sandler, R. and Kay, W. D., “The National Nanotechnology Initiative and the Social Good,” Journal of Law, Medicine, and Ethics 34, 4 (2006): 675-81.

Sergici A.O., Adams G.G., Müftü S., “Adhesion in the contact of a spherical indenter with a layered elastic half-space,” Journal of the Mechanics and Physics of Solids, Vol. 54, No. 9, 2006, pp. 1843-186.

Schädler, V., Gaschler, W., Schmidt, D., and Breiner, T. “Nanocomposite-Foam Material,” International Patent No. WO2006106104, 2006.

Shang,Y., Wei, M., Kazmer,D., Barry,C. & Mead,J., “Experimental Validation of Numerical Simulation for Phase Decomposition of a Binary Polymer Thin Film on a Patterned Substrate”, ANTEC 2007, accepted

Shang,Y. and Kazmer, D., “Modeling of Polymer Self-Assembly,” US-Japan Young Researchers Conference, Feb. 27, 2006.

Shang,Y., and Kazmer,D., “Simulation of Polymer Morphology in Nano-Feature Replication,” Tripathy Memoriam Symposium, Sept. 22, 2005

Shang, Y., Wei, M, Kazmer, D., Barry, C. and Mead, J., “Experimental validation of numerical simulation for phase decomposition of a binary polymer thin film on a patterned substrate”, SPE 2007 Annual Technical Conference Proceedings - Cincinnati, Ohio.

Shim,D, Sun,H., Srikar,V, and Spearing, M, “Silicon-Glass-Metal Microfluidic Joints for High Pressure and Temperature MEMS devices”, Journal of Microelectromechanical Systems (JMEMS), Vol.15, Issue 1, 246 – 258, 2006.

Taylor,H., Sun, H., Hill, T, Farahanchi, A., Boning,D., “Characterizing and Predicting Spatial Non-uniformity in DRIE for MEMS”. In press, Journal of Electrochemical Society (JES), 2006.

Vajtai R., Biswas S., Wei B., Meng G., Jung Y., and Ajayan P. , “Electrical Characterization of Carbon Nanotube Structures” Nano 1, 1, 45-68 (2006).

Wei, M., Tao, Z., Xiong, X., Kim, M., Lee, J, Somu, S., Sengupta, S., Busnaina, A., Barry, C., and Mead, J., “Fabrication of Patterned Conducting Polymers on Insulating Polymeric Substrate by Electric-Field_Assisted Assembly of Conducting Polymers and Patterned Transfer,” J. of Macromolecular Rapid Communications, 2006.

Wei, M., Mead, J.L., et al, “Fabrication of Patterned Conducting Polymers on Insulating Polymeric Substrates by Electric-Field-Assisted Assembly and Pattern Transfer”, Macromolecular Rapid Communications, 2006, 27, 1826–1832.

Wei, M., Kang, B., Sung, C. and Mead, J., “Core-sheath Structure in Electrospun Nanofibers from Polymer Blends, Macromolecular Materials & Engineering, 2006, 291, 1307.

Wei, M., Mead, J.L., et al, “Patterning Of Conducting Polymers On Flexible And Insulating Polymeric Substrates”, SPE 2007 Annual Technical Conference - Cincinnati, Ohio.

Wongkasem, N., Akyurtlu, A, Marx, K.A.,Goodhue, W.D.,Li,J., Dong, Q., and Ada,E.T. “Fabrication of a Novel Micron Scale Y-Structure-Based Chiral Metamaterial: Simulation and Experimental Analysis of its Chiral and Negative Index Properties in the Terahertz and Microwave Regimes,” Special Issue on Nanomanufacturing, Microscopy Research and Technique, ACCEPTED.

Wongkasem, N., Akyurtlu,A., Marx, K. A. ,Dong, Q., Li,J., and Goodhue, W. D., “Development of Negative Refractive Index Chiral Metamaterials in the Optical Frequency Regime,”, Special Issue on Optical and THz Antenna Technology, IEEE Transactions on Antennas and Propagation, revised according to reviewers’ comments and resubmitted on Jan. 31, 2007.

Wongkasem. N. ,Akyurtlu, A., and. Marx, K.A., “Group Theory Based Design of Isotropic Negative Refractive index Metamaterials,”, Progress in Electromagnetic Research, PIER 63, pp. 295-310, 2006.

Wongkasem, N., Akyurtlu, A., Li,J, Tibolt, A., Kang, Z., Goodhue, W. D. “Novel Broadband THz Negative Refractive Index Metamaterials: Analysis and Experiment,” Progress in Electromagnetic Research, PIER 64, pp. 205-218, 2006.

Xiong, X., Makaram, P., Busnaina, A. Bakhtari, K., Somu, S., McGruer, N., and Park, J., "Large Scale Directed Assembly of Nanoparticles Using Nanotrench Templates", Appl. Phys. Lett. 89, 193108 (2006).

Xiong X., Makaram P., Bakhtari K., Somu S., Busnaina A., Small J., McGruer N., and Park J., “Directed Assembly of Nanoelements Using Electrostatically Addressable Templates”, Res. Soc. Symp. Proc. Vol. 901E © 2006 Materials Research Society

Xiong X., Makaram P., Busnaina A., Bakhtari K., Somu S., and McGruer N.E., “Large scale directed assembly of nanoparticles using nanotrench templates,” Applied Physics Letters, Vol. 89, 193108, 3 pages, (2006)

Yang T., Okano S., Berber S., and Tomanek D., “Interplay between structure and magnetism in Mo12S9I9 nanowires”, Phys. Rev. Lett. 96,125502 (2006); Virtual Journal of Nanoscale Science & Technology: (http://www.vjnano.org)

Yoon, Y.H., Alabran, M.W., Lee ,J.S., Mead, J.L., and Barry, C.M. “Micro-Injection Molding Of High Aspect Ratio Features With Thermoplastic Polyurethanes”, Society of Plastics Engineers Annual Technical Conference 2007, May 2007 (submitted)

Yoon, S.H., Lee ,J.S., Park, K., Mead, J.L., Matsui, S. and Barry, C.M., “Critical Factors For Nanoscale Injection Molding”, Proceedings of SPIE-The International Society of Optical Engineering, Volume 6380, October 23, 2006.

Zen G. and Müftü S., "Stability of an accelerating string subjected to frictional guiding forces,” Journal of Sound and Vibration, Vol. 289, pp. 551-576, 2006.

Zhang, H., Sun, H., Charmchi, M. Veilleux, D. and Faghri, M., “Experimental and numerical investigation go melting in the presence of a magnetic field-simulation of low gravity”, accepted. Journal of Heat Transfer, 2007.

Reviewed Conference Proceedings:

Alabran, M.W., Carter, D.C., Busnaina, A. A., Mead, J. L., and Barry, C. M. F, “Effects of Tooling and Injection Molding Conditions on Nanoscale Replication of Thermoplastic Elastomers,” Proceeding of Annual Technical Conference of the Society of Plastics Engineers, 2007 – accepted.

Borgaonkar, P., Sharma, S., Chen, M., Bhowmick, S., and Schmidt, D. F. “A Flexible, Biomimetic Approach to the Preparation of Polymer Scaffolds for Tissue Engineering”, Macromol. Biosci., 7, 201, 2007.

Bosso, C, Isaacs, J., Kay, W.D., Sandler, R., and Rodrigues, R., “Slowing the Nanoscale Revolution? Questions About Government Regulatory Capacity,” Technical Proceedings of the 2006 Nanotechnology Conference and Trade Show, Vol. 1 (Nano Science and Technology Institute, 2006): 557-560.

Carlson, D., Filoti, D., Brown, A., Deniz, D., Shover, A.M, Harper, J.M.E. and Cherim, N. “Composite Au-SiO2 Thin Films for Controlling Thiol Attachment Areas”, Proc. 4th New England Nanomanufacturing Workshop, 2006.

Chen C. L., Selvarasah S., Chao S. H., Khanicheh A., Mavroidis C., and Dokmeci M. R., "Electrohydrodynamic Micropump for On-Chip Fluid Pumping on Flexible Parylene Substrates", Proceedings, IEEE NEMS Conference, Bangkok, Thailand, pp. 826-829, January 2007.

Chen C. L., Khanicheh A., Selvarasah S., Mavroidis C. and Dokmeci M. R., “An Electrohydrodynamic Micropump for on-Chip Micro Bioreactors,” MRS Fall Meeting, Symposium E: Nanofunctional Materials, Nanostructures, and Novel Devices for Biological and Chemical Detection, E11.5, Boston, November 2006.

Chou H.Y., Müftü S., Bozkaya D., “Biomechanical evaluation of A wide–diameter short dental implant for use in compromised bone quality regions by finite element method”, Proceedings of NanoBio2006, Frontiers in Biomedical Devices Conference June 8-9, 2006, Irvine, California, USA, NanoBio2006, 18022.

Du Y., Chen L., McGruer N.E., Adams G.G., and Etsion I., “A Finite Element Model of Asperity Contact With Adhesion and Plasticity,” Proceedings of IJTC2006 STLE /ASME International Joint Tribology Conference, October 22-25, 2006, San Antonio, TX, USA, CD-ROM, IJTC2006-12295, 8 pages.

Gaith M. and Müftü S., “The vibration of two axially translating strings interconnected by winkler elastic foundation,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition November 5-10, 2006 Chicago, Illinois IMECE2006-14067.

Gaith M. and Müftü S., “Analytical and experimental natural frequencies of transverse vibration of sandwich beams interconnected by Winkler elastic foundation,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition November 5-10, 2006 Chicago, Illinois, IMECE2006-14069.

Gaith M. and Müftü S., “Free vibration analysis of two axially translating strings interconnected by a continuous elastic foundation,” ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) Santa Clara, CA, June 21-23, 2006.

Hahm M., Selvarasah S., Lopez E., Chen C. L., Jung Y. J., Dokmeci M., and Muftu S., “Manufacturing and Performance Evaluation of Organized Carbon Nanotube-Parylene Multi-Functional Active Thin-Films,” MRS Fall Meeting, Symposium C: Smart Dielectric Polymer Properties, Characterization, and Their Devices, C3.18, Boston, November 2006.

Isaacs, J.A., Bosso, C.J., and Barry, C.M.F., “Engineering and Public Policy at the Nanoscale: An Interdisciplinary Graduate Course”, Proceedings of ASEE 2006 Annual Conference and Exposition, Chicago IL, American Society for Engineering Education (ASEE), Washington, DC, CD-ROM, June 18-21, 2006.

Isaacs, J.A., Tanwani, A., Healy, M.L., “Environmental Assessment of SWNT Production”, 2006 Proceedings of the 2006 IEEE International Symposium on Electronics and the Environment, San Francisco, CA, pp. 38-41, 8-11 May 2006,.

Jiang, T.,Kussow, A., and Kwon, Y. "Alcohol Sensing of Glycine-Coated Carbon Nanotubes", APS March Meeting, Denver, CO, Mar. 5-9, 2007.

Khanduja N., Selvarasah S., Makaram P., Chen C. L., Busnaina A., and Dokmeci M. R., "Three Dimensional Dielectrophoretic Assembly of Single-Walled Carbon Nanotubes for Integrated Circuit Interconnects", Proceedings, IEEE MEMS conference, Kobe, Japan, pp. 823-26, January 2007.

Kim, M., Lee, J., Wei, M., Chiota, J., Tao, Z., Sengupta, S., Somu, S., Busnaina, A., Barry, C. and Mead, J., “High-rate Nanomanufacturing of Nanoscale Patterns and Sensors by Rapid Thermal Printing of Nano-elements-assembly onto a Plastic,” Proceedings, 2006 MRS Spring Meeting, San Francisco, CA, April 17-21, 2006.

Lee, M., Im, J., Lee, B.Y., Myung, S., Kang, J., Huang, L., Kwon, Y., and Hong, S., “Linker-free directed assembly of high-performance integrated devices based on nanotubes and nanowires”, Nature Nanotech. 1, 66 (2006).

Lodwick, T., Rodrigues, R., Sandler, R., and Kay, W.D., “Nanotechnology and the Global Poor: United States Policy and International Collaborations,” Technical Proceedings of the 2007 Nanotechnology Conference and Trade Show (Nano Science and Technology Institute, forthcoming).

Lopez, E., Chen, C.-L., Jung,Y.J., Dokmeci M., and Muftu S., “Manufacturing and Performance Evaluation of Organized Carbon Nanotube-Parylene Multi-Functional Active Thin-Films” MRS Fall Meeting, Boston, MA, Abstract No C3.18, 2006.

McGruer N.E., Adams G.G. Chen, L., Guo J., and Du Y., “Mechanical, Thermal, and Material Influences on Ohmic-Contact-Type MEMS Switch Operation,” IEEE International Conference on MEMS (MEMS 2006), Istanbul, Turkey, January, 22-26, 2006, pp. 230-233, CD-ROM. (29% acceptance rate in 2006, #1 conference in the field)

Niev P.M., McGruer N.E., and Adams G.G., “MEMS-Based Fabry-Perot Vibration Sensor for Harsh Environments,” Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Proceedings of the SPIE, Vol. 6174, 617426-1 – 617426-11, (2006). (11 pages)

Nieva P.M., McGruer N.E., and Adam G.G., “Air Viscous Damping Effects in Vibrating Microbeams,” Smart Structures and Materials 2006: Damping and Isolation, Proceedings of the SPIE, Vol. 6169, 61690N-1 – 61690N-12, (2006). 12 pages.

Nieva P.M., McGruer N.E., and Adams G.G., “A Multipurpose Optical MEMS Sensor for Harsh Environments,” NSTI-Nanotech 2006, Vol. 3, 2006, pp. 419-422.

Noah, M. and Kwon, Y., “Toward 100% semiconducting Devices From Mixed Chirality Nanotube Networks" APS March Meeting, Denver, CO, Mar. 5-9, 2007.

Noah, M and Kwon, Y "Hydrogen Storage NanoMaterial with Potential Pockets", APS March Meeting, Denver, CO, Mar. 5-9, 2007.

Pamp, A., and Adams G.G., “Deformation of Bowed Silicon Wafers Due To Applied Pressure and Adhesion,” Proceedings of IJTC2006 STLE /ASME International Joint Tribology Conference, October 22-25, 2006, San Antonio, TX, USA, CD-ROM, IJTC2006-12279.

Rajalingam B., Wright D., Karp J. M., Selvarasah S., Ling Y., Yeh J., Langer R., Dokmeci M. R and Khademhosseini A., “Reusable, Reversibly Sealable Parylene-C Membranes for Cell and Protein Patterning,” MRS Fall Meeting, Symposium D: Biosurfaces and Biointerfaces, D15.22, Boston, November 2006.

Schmidt, D., Qian, G., and Giannelis, E. P. “Nanocomposites from Novel Synthetic Organo-Layer Silicates” Polym. Mater. Sci. Eng. Proc. Am. Chem. Soc., 82, 215, 2000.

Selvarasah S., Khanduja N., Xiong X., Chao S. H., Makaram P., Chen C. L., Busnaina A., and Dokmeci M. R., "A Micromachined Platform for Three Dimensional Dielectrophoretic Assembly of Gold Nanoparticles for Nanodevices", Proceedings, IEEE NEMS Conference, Bangkok, Thailand, pp. 809-812, January 2007.

Selvarasah S. and Dokmeci M. R., “A Parylene Shadow Mask Technology for Rapid Fabrication and Prototyping of Large Scale Micro and Nano Device Applications,” MRS Fall Meeting, Symposium R: Meta-Materials at the Milli-, Micro- and Nanoscale, R3.21, Boston, November 2006.

Selvarasah, S., Khanduja, N., Chen, C.L., Chao, S.H., Makaram, P., Busnaina, A., and Dokmeci, M.R., “Three Dimensional Dielectrophoretic Assembly of Nanostructures on a Micromachined Platform,” Proceedings, 2006 SEM Annual Conference on Experimental Mechanics, St. Louis, MO June 4-7, 2006. (CD)

Selvarasah, S., Chao, S.H., Chen, C.L., Mao, D., Ryley, S., Busnaina, A., and Dokmeci, M.R., “A High Aspect Ratio Parylene Micro-stencil for Large Scale Micro-patterning for MEMS Applications,” Proceedings, 2006 SEM Annual Conference on Experimental Mechanics, St. Louis, MO June 4-7, 2006. (CD)

Shang,Y. and Kazmer, D., “Modeling of Polymer Self-Assembly,” US-Japan Young Researchers Conference, Feb. 27, 2006.

Shang, Y., Wei, M, Kazmer, D. Barry, C. and Mead, J., “Experimental validation of numerical simulation for phase decomposition of a binary polymer thin film on a patterned substrate”, SPE 2007 Annual Technical Conference Proceedings - Cincinnati, Ohio.

Shover, A.M., Dellas, N., Carlson D.R and Harper, J.M.E. “Metal-Insulator Composite Thin Films for Nanotemplates,” Proc. 4th New England Nanomanufacturing Workshop, 2006.

Soldano C., Kar S., Jung Y., and Ajayan P., “Electro-Mechanically Robust, Flexible Carbon Nanotube-PDMS Composite for High Performance Field Emission” MN (Multifunctional Nanocomposite) 2006, Honolulu, Hawaii.

Song H. J., Lee Y., Jiang T., Kussow A.-G., Lee M., Hong S., Kwon Y.-K., and Choi H. C., “Spontaneously self-clustered glycines on single walled carbon nanotubes for specific sensing to alcohols”, submitted for publication to J. Am. Chem. Soc.

Sun,H., Faghri, M., “Modeling Gaseous Flows through Micro- and Nano-channels”, accepted. 2007 ASME International Conference on Integration and Commercialization of Micro and Nano-systems, January 10-13, Sanya, China, 2007.

Sun, H., Jamil,F., “Simulation of Vibrating-plate Based Micromixer”, COMSOL conference, Cambridge, MA, 2006.

Wang L., Murthy S. K., Dokmeci M. R., Carrier R. L., “Chemical and Topographical Modification to Polydimethylsiloxane Surfaces Affect Growth and Adhesion of Caco-2 Cells,” AIChe Annual Meeting, 08B14 Biomimetics III: Cell-Material Interactions, San Francisco, November 2006.

Wei, M., Tao, Z., Somu, S., Kim, M., Sengupta, S., Busnaina, A., Barry, C. and Mead, J., “Directed Assembly of Conducting Polymers Using Electrostatically Addressable Templates and Pattern Transfer by Compression Molding or Solution Casting,” Proceedings, 2006 MRS Spring Meeting, San Francisco, CA, April 17-21, 2006.

Wei, M., Mead, J.L., et al, “Patterning Of Conducting Polymers On Flexible And Insulating Polymeric Substrates”, SPE 2007 Annual Technical Conference - Cincinnati, Ohio.

Wright D., Rajalingam B., Selvarasah S., Ling Y., Dokmeci M. R and Khademhosseini A., “Micropatterned Parylene Stencils for Generation of Dynamic and Static Patterned Cellular Co-cultures,” MRS Fall Meeting, Symposium D: Biosurfaces and Biointerfaces, D15.24, Boston, November 2006.

Yin, Y. and Zhang, X., “Assessment of Carbon Nanotubes on Activated Sludge Wastewater Treatment Process.” Water Environment Federation Annual Conference. San Diego, CA. October, 2007

Yoon, S.H., Lee, J.S., Mead, J.L., Carter, D. , Cha, N.G., Park, J.G., and Barry, C.M., “Micro-injection molding of high aspect ratio features with thermoplastic polyurethanes”, Society of Manufacturing Engineers Micro Manufacturing Conference and Exhibits, March 14, 2007 (submitted)

Yoon, S.H., Lee, J.S., Park, K., Mead, J.L., Matsui, S. and Barry, C.M., “Critical Factors For Nanoscale Injection Molding”, Proceedings of SPIE-The International Society of Optical Engineering, Volume 6380, October 23, 2006.

Zhang, X., Bruell, C., Hines, M., Watterson, A. and Barry, C. (2007) Laboratory Modules on Environmental Impacts of Nanotechnology, 2007 Spring ACS National Meeting, Chicago, IL. March, 2007. (Accepted)

Zhang, X., Bruell, C., Yin, Y. and Jayaradu, P. (2007) Introducing Nanotechnology into Environmental Engineering Curriculum. ASEE Annual Conference, June 2007. (Accepted)

Zhang, X., Bruell, C., Hines, M., Watterson, A. and Barry, C. (2007) Interdisciplinary approach to introduce environmental nanotechnology into undergraduate curricula. ASEE Annual Conference, June 2007. (Accepted)