2006 Publications
Chapters in Books:
Barry, C., Chen, J. and Mead, J. “Nanomanufacturing Processes Using Polymeric Materials,” in Nanomanufacturing Handbook, edited by A. Busnaina, CRC Press. In Press
C. Barry, Chen, J. Mead, J. and Schmidt, D. “Multiscale Processing of Polymers and Composites” in CRC Materials Processing Handbook , edited by Joanna Groza, CRC Press, 2006
Bosso, C., Isaacs, I., Kay, W. and Sandler, R. “Leaving the Laboratory: Regulatory and Societal Issues Associated with Nanomanufacturing in The Handbook of Nanomanufacturing, , edited by A. Busnaina,, CRC Press, 2006.
Schmidt, D., Mead, J., Barry C. and Chen, J. “Nanomanufacturing with Polymers,” in Modern Plastics Handbook, ed. by Modern Plastics and C. Harper, McGraw-Hill, New York. In Press
Papers in Peer Reviewed Technical Journals:
Ahn, K., Lee, J., Tsai, C. Mead, J., and Ellenbecker, M.J.“Use and Efficacy of Protective Gloves in Handling Nanomaterials,” invited paper for a special edition of the Journal of Nanoparticle Research.
Athans, A.D., Briggs, J.B. and Miller, G.P. “Hydrogen Protected Acenes: Regioselective Reductions and Facile Deprotections, Tetrahedron, In Press.
Bahar, R. Tahoori, M.B., Shukla, S.K., and Lombardi, F. “Guest Editors’ Introduction: Challenges for Reliable Design at the Nanoscale”, IEEE Design and Test of Computers, Vol. 22, No. 4, pp. 295-297, July-August 2005.
Basl, J., “Virtue Ethics and the Concerns Characterizing the Pessimist Paradigm: A Reply to Letham,” News From the Bottom, available at: http://schc.sc.edu/nfb/NFBIssues.lasso 2005.
Bosso C. and Kay, W.D. “A Nanotech Velvet Revolution? Issues for Social Science Inquiry,” STEP Ahead, the Newsletter of the Science, Technology, and Environmental Policy Section, 3, no. 2, 2-4. 2005
Briggs, J.B., Montgomery, M.N., Silva, L. and Miller, G.P. “Facile, Scalable, Regioselective Synthesis of C3v C60H18 Using Organic Polyamines,” Organic Letters, 7, 5553, 2005.
Briggs, J.B. and Miller, G.P. “[60]Fullerene-Acene Chemistry: A Review,” invited manuscript, Comptes Rendus Chimie, In Press.
Busnaina, A.., Bakhtari, K., Guldiken, G. and Park, J, “Experimental and Analytical Study of Submicron Particle Removal from deep trenches,” J. of Eletrochem. Soc. JES-05-1504, In Press.
Busnaina, A., Bakhtari, K., Guldiken, G., Makaram, P., and Park, J, “Nanoparticle Removal Using Acoustic Streaming,” J. of Eletrochem. Soc. (JES-05-1503, submitted).
A.Chandekar, S. K. Sengupta, C. M. F. Barry, J. L. Mead, J. E. Whitten, “Template-Directed Adsorption of Block Copolymers on Alkanethiol-Patterned Gold Surfaces”, Langmuir, submitted.
S. M. Cleary and H. R. Mayne, “High-Symmetry Mixed Lennard-Jones Binary Clusters,” Chem. Phys Letters, 418, 79, 2006.
Guldiken, O., Bakhtari, K., Busnaina, A., and Park, J., “Metrology and Removal of Nanoparticles from 500 micron Deep Trenches,” J. of Solid State Phenomena, Vol. 103-104, pp. 137-140, 2005.
Han, J.H., Koo, J.E. , Hong, D.H., Park, B.L., Kim, S.I. , Ch, I.S.,, Em, D.H., Park, J.G, and Busnaina, A., “Effects of Patterns on Corrosion in Cu CMP,” J. of Solid State Phenomena, Vols. 103-104, April pp. 369-372, 2005.
Harper J.M.E, “Simultaneous Effects on Topography, Composition and Texture in Ion Assisted Deposition of Thin Films,” Proc. Mat. Res. Soc, 843, 169, 2005.
Jung, Y.J., Kar, S., Talapatra, S. Soldano, C., Vishwanathan, C. ,Li, X., Yao, Z., Ou, F., Vajtai, R., Ajayan, P.M., Nalamasu, O. “High Performance Field Emission Device from Organized Carbon Nanotube Building Blocks-PDMS Composite” Nano Letters, 6, 413, 2006.
Kay, W.D. and Rodrigues, R. “Patents: A Political Primer.” submitted to Issues in Science and Technology
Hong, Y.K., Han, J.H. , Lee, J.H., Park, J.G., and Busnaina, A., “Adhesion and Removal of Alumina Slurry Particles on Wafer Surfaces in Cu CMP,” J. of Solid State Phenomena, Vols. 103-104, pp. 275-278, April 2005.
Kwon, Y.K., Berber, S. and Tomanek, D. Reply to Comment on “Thermal Contraction of Carbon Fullerenes and Nanotubes", Phys. Rev. Lett. 94, 209702 (2005).
Lastella, S., Mallick, G., Woo, R., Karna, S.P., Jung, Y.J., Ajayan, P.M., Ryu, C., Rider, D., and Manners, I. “Scaled-up Fabrication of High-Throughput Singlewalled Carbon Nanotube Field Effect Transistors ” Journal of Applied Physics, 99, 024302, 2006.
Li, S., Cao, A., Jung, Y.J., Vajtai, R., and Ajayan, P.M. “Bottom-up Growth of Carbon Nanotube Multilayers” Nano Letters, 5 (10), 1997, 2005
Makaram, P., Xiong, X., Busnaina, A.A., and Ryley, S. SWNT Directed Assembly Using Nanotemplates, submitted to Nanoletters.
Meng, G., Jung, Y.J., Cao, A., Vajtai, R. and Ajayan, P.M. “Controlled Synthesis of Hierarchically Branched Carbon Nanotubes via Rationally Designed Porous Templates” Proceeding of National Academy of Science, 12(20), 7074, 2005.
Miller, G.P., Okano, S. and Tomanek, D. Toward uniform nanotubular compounds: Synthetic approach and ab initio calculations, J. Chem. Phys. 124, 121102, 2006.
Miller, G.P., Briggs, J.B., Mack, J., Okana, S., and Tománek, D.“Towards uniform nanotubular compounds: Synthetic approach and ab initio calculations,” J. Chemical Physics, In Press.
Miller, G.P. “[60]Fullerene-Amine Chemistry: A Review,” invited manuscript, Comptes Rendus Chimie, In Press.
Nemec, N., Tomanek, D. and Cuniberti, G. Contact Dependence of Carrier Injection in Carbon Nanotubes: An Ab Initio Study, Phys. Rev. Lett. 96, 076802, 2006.
Park, J.G., Ryu, J.S., Lee, S.H., Hong, Y. K., Kim, T.G., and Busnaina, A. “Interfacial and Electro-kinetic Characterization of IPA Solutions Related to Semiconductor Wafer Drying,” J of the Electrochem. Soc., JES-05-1704, In Press.
Rodrigues, R., “The Implications of High-Rate Nanomanufacturing on Society and Personal Privacy” Bulletin of Science, Technology, & Society, 26, 1 38-45, 2006.
Ryan, P.J., Adams, G.G., McGruer, N.E., and Muftu, S., “Contact Scanning Mode AFM for Nanomechanical Testing of Free Standing Structures,” Journal of Micromechanics and Microengineering, In press.
Sandler, R. and Kay, W. D., “The GMO-Nanotech (Dis) Analogy?” Bulletin of Science, Technology, and Society 26,: 57-62, 2006a.
Shover, A.M., Harper, J.M.E., Dellas, N.S., and Chan, W.J.M. “Formation of High-Resistivity Silver-Silicon Dioxide Composite Thin Films Using Sputter Deposition”, Proc. Mat. Res. Soc. 843, 329. 2005.
Tahoori, M.B., “A Mapping Algorithm for Defect Tolerance of Reconfigurable Nano-architectures”, In IEEE/ACM International Conference on Computer Aided Design (ICCAD), pp. 668-672, 2005.
Tahoori, M.B. “Defects, Yield, and Design in Sublithographic Nano-electronics”, In IEEE Symposium on Defect and Fault Tolerant (DFT), pp. 3-11, 2005.
Tahoori, M. B., Mitra, S. “Defect and Fault Tolerance in Reconfigurable Molecular Computing” In Field Custom Computing Machines (FCCM) Conference, pp. 176-185, 2004.
Tomanek, D. Carbon-based nanotechnology on a supercomputer, Topical Review, J. Phys.: Condens. Matter 17, R413-R459 (2005).
Wei, , M, Tao, Z., Somu, S., Xiong, X., Kim, M., Sengupta, S. A. Busnaina, A., Barry, C. and Mead, J. "Directed assembly of conducting polymers using electrostatically addressable templates and pattern transfer to polymeric substrate", submitted to Advanced Materials, 2006.
White, R.P., Cleary, S.M., and Mayne, H.R. Phase Changes in Lennard-Jones Mixed Clusters with Composition Arn Xe6-n (n=0,1,2,), J. Chem Phys. 123, 094505, 2005.
Xiong, X., Makaram, P., Busnaina, A., McGruer, N., Somu, S.and J. Park, "Large scale directed assembly of nanoparticles into nanoscale trenches using electrophoresis", Submitted to Nano Letters, 2006.
Xiong, X., Busnaina A., Wei, W., Makaram, P., Mead, J. "Electric field-assisted directed assembly of nanoparticles using templates", submitted to Advanced Materials, 2006.
Yang, T., Okano, S., Berber, S. and Tomanek, D. Interplay between structure and magnetism in Mo12S9I9 nanowires, Phys. Rev. Lett. 96, 125502, 2006.
Peer Reviewed Conference Proceedings:
Alpert, C.L., Isaacs, J.A., Barry, C., Miller, G.P. and Busnaina, A. “Nano’s Big Bang: Transforming Engineering Education and Outreach”, Proceedings of ASEE 2005 Annual Conference and Exposition, June 12 - 16, 2005, Portland OR, American Society for Engineering Education (ASEE), Washington, DC, CD-ROM.
Bakhtari, K., and Busnaina, A., “The Removal of Nanoparticles from Trenches, Wafers and Masks; the effect of Megasonic Frequency and Cleaning,” Proceedings, 2005 Surface Preparation and Cleaning Conference, Austin, TX , April 19-20, 2005.
Bakhtari, K., and Busnaina, A., “The Effect of Frequency on Nanoparticle Removal Using Acoustic Streaming (Megasonics),” Proceedings, AVS, ICMI’05, Santa Clara, CA, March 21-23, 2005.
Busnaina, A., Bakhatri, K., Xiong, X. and Makaram, P., “Directed Assembly and Control of Nanoparticles,” Proceedings, MRS Fall 2005 Meeting, Boston, MA, November 28- December 2, 2005, pp. 474.
Busnaina, A. and Park, J., “The Removal of Particle in Post-CMP Applications,” 2nd PacRim Int’l Conf on Planarization CMP and its Application Technology, Seoul, Korea, November 17-19, 2005, pp. 73-78, Invited.
Busnaina, A., Mead, J., Miller, G., and Barry, C., “Nanomanufacturing Using Nanotemplates for Directed Assembly of Nanoelements,” Proceedings, AVS 52nd International Symposium, Boston, MA, October 30-November 4, 2005. Invited Paper.
J. A. Isaacs, C. Bosso, and C. M. F. Barry, “Engineering and Public Policy at the Nanoscale: An Interdisciplinary Graduate Course,” Proceedings of ASEE 2005 Annual Conference and Exposition, June 18 - 21, 2006, Chicago IL, American Society for Engineering Education (ASEE), Washington, DC, CD-ROM.
Lee, S., Park, J., Busnaina, A., Lee, J., Kim, T., Zhang, G. and Eschbach, F., “Nanoscale Particles Removal on an Extreme Ultra-Violet Lithography (EUVL) Mask Layer,” 208th ECS Meeting, Los Angeles, CA, October 16-21, 2005.
Makaram, P.; Xiong, X.; Bakhtari, K.; Busnaina, A.A.; and Miller, G. SWNT Directed Assembly Using Nanotemplates, Proceedings, MRS Fall Meeting, Boston, MA, November 28- December 2, 2005, pp. 418.
Makaram, P., Lee, S.H, Kang, Y.J, Okutucu, T., Park, J.G., Busnaina, A., Jang, D., Kim, D.S., Lee, J.M., Kim, T.H., Zhang, G., Eschbach, F. And Ramamoorthy, A, "Investigation of Nanoparticle Removal and possible Substrate Damage for EUV Reticles using Laser Shock Cleaning and Acoustic Streaming," Proceedings, Sematech Int’l, Mask Cleaning Workshop, San Jose, CA, October 2005.
Makaram, P., Xiong, X., Bakhatri, K., Busnaina, A. and Miller, G., “SWNT Directed Assembly Using Nanotemplates,” Proceedings, MRS Fall 2005 Meeting, Boston, MA, November 28- December 2, 2005, pp. 476.
Park, J-G, and Busnaina, A. “Cu Post-CMP Cleaning and the Effect of Additives,” Semiconductor International, August 2005.
Song J., Hong , Y., Kim, T., Kang, Y., Kim, I., Park, J. and Busnaina, A., “Effect of BTA on Particle Adhesion in Cu CMP,” 208th ECS Meeting, Los Angeles, CA, October 16-21, 2005.
Tahoori, M.B. “Yield Analysis and Defect Tolerance of Molecular Crossbars”, In IEEE International Workshop on Design and Test of Defect-Tolerant Nanoscale Architectures (NANOARCH), 2005.
Tahoori, M. B., Mitra, S. “Toward Testing Reconfigurable Molecular Systems”, In Test Resource Partitioning (TRP) Workshop, 2004.
Tomanek, D. Computational Nanotechnology: From Clusters to Devices, AIP Conf. Proc. 777, 118, 2005.